2019/10/02(水)ユーザの追加

OpenBSDにはユーザを作成するために adduserコマンド と useraddコマンド がある。

adduserコマンド は perlスクリプトファイルで対話的である。

useraddコマンドは バイナリファイルで 対話的でない。
OpenBSD-PINE64$ file `which adduser`
/usr/sbin/adduser: a /usr/bin/perl script text executable
OpenBSD-PINE64$ file `which useradd`
/usr/sbin/useradd: ELF 64-bit LSB shared object, AArch64, version 1


adduserコマンドは問いに答えていくと必要な設定も行える為、1ユーザを作るときに向いている。
OpenBSD-PINE64# adduser
Use option ``-silent'' if you don't want to see all warnings and questions.

Reading /etc/shells
Check /etc/master.passwd
Check /etc/group

Ok, let's go.
Don't worry about mistakes. There will be a chance later to correct any input.
Enter username []: bsduser
Enter full name []: 
Enter shell csh ksh nologin sh [ksh]: 
Uid [1001]: 
Login group bsduser [bsduser]: 
Login group is ``bsduser''. Invite bsduser into other groups: guest no 
[no]: 
Login class authpf bgpd daemon default pbuild staff unbound 
[default]: 
Enter password []: 
Enter password again []: 

Name:        bsduser
Password:    ****
Fullname:    bsduser
Uid:         1001
Gid:         1001 (bsduser)
Groups:      bsduser 
Login Class: default
HOME:        /home/bsduser
Shell:       /bin/ksh
OK? (y/n) [y]: 



useraddコマンドは対話的ではないため様々な設定を個別に行う必要がある。
以下は useraddコマンドでbsduserを作成したところである。
OpenBSD-PINE64# useradd bsduser
useradd: Warning: home directory `/home/bsduser' doesn't exist, and -m was not specified
OpenBSD-PINE64# id bsduser
uid=1001(bsduser) gid=1001(bsduser) groups=1001(bsduser)
/home/bsduser ディレクトリがないことを注意されたので作成しておく。
OpenBSD-PINE64# mkdir /home/bsduser
作ったホームディレクトリの所有者を変更する。
OpenBSD-PINE64# ls -lF /home/ 
drwxr-xr-x  2 root  wheel  512 Apr 21 04:12 bsduser/
OpenBSD-PINE64# chown bsduser:bsduser /home/bsduser/                                                 
OpenBSD-PINE64# ls -lF /home/                        
drwxr-xr-x  2 bsduser  bsduser  512 Apr 21 04:12 bsduser/
パスワードの設定をする。
OpenBSD-PINE64# passwd bsduser 
Changing password for bsduser.
New password:
Retype new password:
弱いパスワードだと注意される。
OpenBSD-PINE64# passwd bsduser 
Changing password for bsduser.
New password:
Please don't use an all-lower case password.
Please use a different password. Unusual capitalization,
control characters, or digits are suggested.
New password:

最後に初期設定ファイルが /etc/skel/ディレクトリにある。
ここのファイルを各ユーザのホームディレクトリにコピーすればよい。
コピーした後のファイルはそのホームディレクトリのユーザが所有者になっていないとアクセスできないので注意。
OpenBSD-PINE64# ls -alF /etc/skel/
total 36
drwxr-xr-x   3 root  wheel   512 Apr 17 21:16 ./
drwxr-xr-x  22 root  wheel  1536 Apr 21 04:20 ../
-rw-r--r--   1 root  wheel    87 Apr 17 20:25 .Xdefaults
-rw-r--r--   1 root  wheel   771 Apr 17 20:25 .cshrc
-rw-r--r--   1 root  wheel   101 Apr 17 20:25 .cvsrc
-rw-r--r--   1 root  wheel   359 Apr 17 20:25 .login
-rw-r--r--   1 root  wheel   175 Apr 17 20:25 .mailrc
-rw-r--r--   1 root  wheel   215 Apr 17 20:25 .profile
drwx------   2 root  wheel   512 Apr 17 21:16 .ssh/
OpenBSD-PINE64# ls -alF /etc/skel/.ssh/                                                              
total 8
drwx------  2 root  wheel  512 Apr 17 21:16 ./
drwxr-xr-x  3 root  wheel  512 Apr 17 21:16 ../
-rw-------  1 root  wheel    0 Apr 17 20:25 authorized_keys
OpenBSD-PINE64# cp -r /etc/skel/.* /home/bsduser/
OpenBSD-PINE64# chown -R bsduser /home/bsduser/.*
OpenBSD-PINE64# ls -alF /home/bsduser/                                                               
total 36
drwxr-xr-x  3 bsduser  bsduser  512 Apr 21 04:25 ./
drwxr-xr-x  4 root     wheel    512 Apr 21 04:12 ../
-rw-r--r--  1 bsduser  bsduser   87 Apr 21 04:25 .Xdefaults
-rw-r--r--  1 bsduser  bsduser  771 Apr 21 04:25 .cshrc
-rw-r--r--  1 bsduser  bsduser  101 Apr 21 04:25 .cvsrc
-rw-r--r--  1 bsduser  bsduser  359 Apr 21 04:25 .login
-rw-r--r--  1 bsduser  bsduser  175 Apr 21 04:25 .mailrc
-rw-r--r--  1 bsduser  bsduser  215 Apr 21 04:25 .profile
drwx------  2 bsduser  bsduser  512 Apr 21 04:25 .ssh/
OpenBSD-PINE64# ls -alF /home/bsduser/.ssh/ 
total 8
drwx------  2 bsduser  bsduser  512 Apr 21 04:25 ./
drwxr-xr-x  3 bsduser  bsduser  512 Apr 21 04:25 ../
-rw-------  1 bsduser  bsduser    0 Apr 21 04:25 authorized_keys

2019/10/02(水)インストールしたときの設定内容

ブートログを書いておいたが、主な設定は次のようになっている。

ブートログ
https://hesy.dyndns.dk/032

  • ホストネームはOpenBSD-PINE64
  • IPv4アドレスを固定
  • IPv6は未設定
  • rootの他にユーザを作成
  • sshdを起動
  • rootはssh接続不可
  • ディスク全体を利用
  • パッケージ全てをインストール
  • タイムゾーンはAsia/Tokyo

2019/10/01(火)PINE のブートログ

PINE A64 に OpenBSD6.5 をインストールしたときのシリアルコンソールに表示されたログ。
U-Boot SPL 2019.01 (Apr 04 2019 - 12:21:29 -0600)
DRAM: 1024 MiB
Trying to boot from MMC1
NOTICE:  BL31: v2.1(debug):2.1
NOTICE:  BL31: Built : 10:19:53, Apr  4 2019
NOTICE:  BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE:  BL31: Found U-Boot DTB at 0x4080c30, model: Pine64+
INFO:    ARM GICv2 driver initialized
INFO:    Configuring SPC Controller
NOTICE:  BL31: PMIC: Detected AXP803 on RSB.
INFO:    PMIC: AXP803: dcdc1 voltage: 3.300V
INFO:    PMIC: AXP803: dcdc5 voltage: 1.360V
INFO:    PMIC: AXP803: dcdc6 voltage: 1.100V
INFO:    PMIC: AXP803: dldo1 voltage: 3.300V
INFO:    PMIC: AXP803: Enabling DC1SW
INFO:    BL31: Platform setup done
INFO:    BL31: Initializing runtime services
WARNING: BL31: cortex_a53: CPU workaround for 819472 was missing!
WARNING: BL31: cortex_a53: CPU workaround for 824069 was missing!
WARNING: BL31: cortex_a53: CPU workaround for 827319 was missing!
INFO:    BL31: cortex_a53: CPU workaround for 843419 was applied
INFO:    BL31: cortex_a53: CPU workaround for 855873 was applied
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x4a000000
INFO:    SPSR = 0x3c9


U-Boot 2019.01 (Apr 04 2019 - 12:21:29 -0600) Allwinner Technology

CPU:   Allwinner A64 (SUN50I)
Model: Pine64+
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   phy interface7
eth0: ethernet@1c30000
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found EFI removable media binary efi/boot/bootaa64.efi
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
Scanning disks on usb...
Disk usb0 not ready
Disk usb1 not ready
Disk usb2 not ready
Disk usb3 not ready
Scanning disks on mmc...
MMC Device 1 not found
MMC Device 2 not found
MMC Device 3 not found
Found 3 disks
161866 bytes read in 14 ms (11 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
## Starting EFI application at 40080000 ...
disks: sd0*
>> OpenBSD/arm64 BOOTAA64 0.16
boot>
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 2816312+707460+8745856+741512 [211288+109+337776+188118]=0xfc07d8
EHCI failed to shut down host controller.
EHCI failed to shut down host controller.
type 0x2 pa 0x40000000 va 0x40000000 pages 0x4000 attr 0x8
type 0x7 pa 0x44000000 va 0x40000000 pages 0x3ef8 attr 0x8
type 0x6 pa 0x47ef8000 va 0x3e024be000 pages 0x10 attr 0x8000000000000008
type 0x7 pa 0x47f08000 va 0x40000000 pages 0x30315 attr 0x8
type 0x2 pa 0x7821d000 va 0x7821d000 pages 0xbdc attr 0x8
type 0x4 pa 0x78df9000 va 0x78df9000 pages 0x1 attr 0x8
type 0x2 pa 0x78dfa000 va 0x78dfa000 pages 0x103 attr 0x8
type 0x1 pa 0x78efd000 va 0x78efd000 pages 0x28 attr 0x8
type 0x0 pa 0x78f25000 va 0x78f25000 pages 0x2 attr 0x8
type 0x6 pa 0x78f27000 va 0x3e334ed000 pages 0x1 attr 0x8000000000000008
type 0x0 pa 0x78f28000 va 0x78f23000 pages 0x4 attr 0x8
type 0x6 pa 0x78f2c000 va 0x3e334f2000 pages 0x1 attr 0x8000000000000008
type 0x2 pa 0x78f2d000 va 0x78f2d000 pages 0x5023 attr 0x8
type 0x5 pa 0x7df50000 va 0x3e38516000 pages 0x10 attr 0x8000000000000008
type 0x2 pa 0x7df60000 va 0x78f2d000 pages 0x20a0 attr 0x8
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 6.5 (RAMDISK) #83: Wed Apr 17 06:13:24 MDT 2019
    deraadt@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem  = 941674496 (898MB)
avail mem = 878891008 (838MB)
mainbus0 at root: Pine64+
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 512KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.7
efi0: Das U-Boot rev 0x20190100
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
agtimer0 at mainbus0: tick rate 24000 KHz
simplebus0 at mainbus0: "soc"
syscon0 at simplebus0: "syscon"
sxiccmu0 at simplebus0
sxipio0 at simplebus0: 103 pins
ampintc0 at simplebus0 nirq 224, ncpu 4: "interrupt-controller"
sxiccmu1 at simplebus0
sxipio1 at simplebus0: 13 pins
sxirsb0 at simplebus0
"x-powers,axp803" at sxirsb0 addr 0x3a3 not configured
"de2" at simplebus0 not configured
"syscon" at simplebus0 not configured
"dma-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
"lcd-controller" at simplebus0 not configured
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
"eeprom" at simplebus0 not configured
"usb" at simplebus0 not configured
"phy" at simplebus0 not configured
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci0 at simplebus0: version 1.0
ehci1 at simplebus0
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at simplebus0: version 1.0
"clock" at simplebus0 not configured
"pinctrl" at simplebus0 not configured
com0 at simplebus0: ns16550, no working fifo
com0: console
sxitwi0 at simplebus0
iic0 at sxitwi0
dwxe0 at simplebus0: address XX:XX:XX:XX:XX:XX
rgephy0 at dwxe0 phy 1: RTL8169S/8110S/8211 PHY, rev. 5
"interrupt-controller" at simplebus0 not configured
"hdmi" at simplebus0 not configured
"hdmi-phy" at simplebus0 not configured
sxirtc0 at simplebus0
"interrupt-controller" at simplebus0 not configured
"clock" at simplebus0 not configured
"pinctrl" at simplebus0 not configured
"rsb" at simplebus0 not configured
"watchdog" at simplebus0 not configured
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
gpio7 at sxipio0: 32 pins
gpio8 at sxipio1: 32 pins
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SU02G, 0080> SCSI2 0/direct removable
sd0: 1886MB, 512 bytes/sector, 3862528 sectors
softraid0 at root
scsibus1 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on rd0a swap on rd0b dump on rd0b
WARNING: preposterous clock chip time
WARNING: CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T

Welcome to the OpenBSD/arm64 6.5 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? I
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN.  You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.

Terminal type? [vt220]
System hostname? (short form, e.g. 'foo') OpenBSD-PINE64

Available network interfaces are: dwxe0 vlan0.
Which network interface do you wish to configure? (or 'done') [dwxe0]
IPv4 address for dwxe0? (or 'dhcp' or 'none') [dhcp] 192.168.1.11
Netmask for dwxe0? [255.255.255.0]
IPv6 address for dwxe0? (or 'autoconf' or 'none') [none]
Available network interfaces are: dwxe0 vlan0.
Which network interface do you wish to configure? (or 'done') [done]
Default IPv4 route? (IPv4 address or none) 192.168.1.1
add net default: gateway 192.168.1.1
DNS domain name? (e.g. 'example.com') [my.domain]
DNS nameservers? (IP address list or 'none') [none] 192.168.1.1

Password for root account? (will not echo)
Password for root account? (again)
Start sshd(8) by default? [yes]
Setup a user? (enter a lower-case loginname, or 'no') [no] hesy
Full name for user hesy? [hesy]
Password for user hesy? (will not echo)
Password for user hesy? (again)
WARNING: root is targeted by password guessing attacks, pubkeys are safer.
Allow root ssh login? (yes, no, prohibit-password) [no]

Available disks are: sd0.
Which disk is the root disk? ('?' for details) [sd0]
Disk: sd0       geometry: 240/255/63 [3862528 Sectors]
Offset: 0       Signature: 0xAA55
            Starting         Ending         LBA Info:
 #: id      C   H   S -      C   H   S [       start:        size ]
-------------------------------------------------------------------------------
*0: 0C      0 130   3 -      1   5   4 [        8192:        8192 ] FAT32L
 1: 00      0   0   0 -      0   0   0 [           0:           0 ] unused
 2: 00      0   0   0 -      0   0   0 [           0:           0 ] unused
 3: A6      1   5   5 -      2 172  42 [       16384:       26624 ] OpenBSD
Use (W)hole disk or (E)dit the MBR? [whole]
Creating a msdos partition and an OpenBSD partition for rest of sd0...done.
/dev/rsd0i: 32668 sectors in 8167 FAT16 clusters (2048 bytes/cluster)
bps=512 spc=4 res=1 nft=2 rde=512 sec=32768 mid=0xf8 spf=32 spt=63 hds=255 hid=8192
The auto-allocated layout for sd0 is:
#                size           offset  fstype [fsize bsize   cpg]
  a:          1806.7M            40960  4.2BSD   2048 16384     1 # /
  b:            59.3M          3741152    swap
  c:          1886.0M                0  unused
  i:            16.0M             8192   MSDOS
Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a]
/dev/rsd0a: 1806.7MB in 3700192 sectors of 512 bytes
9 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
/dev/sd0a (cbe9f3aa878ffb01.a) on /mnt type ffs (rw, asynchronous, local)

Let's install the sets!
Location of sets? (disk http nfs or 'done') [http]
HTTP proxy URL? (e.g. 'http://proxy:8080', or 'none') [none]
(Unable to get list from ftp.openbsd.org, but that is OK)
HTTP Server? (hostname or 'done') ftp.riken.jp
Server directory? [pub/OpenBSD/6.5/arm64]

Select sets by entering a set name, a file name pattern or 'all'. De-select
sets by prepending a '-', e.g.: '-game*'. Selected sets are labelled '[X]'.
    [X] bsd           [X] base65.tgz    [X] game65.tgz    [X] xfont65.tgz
    [X] bsd.mp        [X] comp65.tgz    [X] xbase65.tgz   [X] xserv65.tgz
    [X] bsd.rd        [X] man65.tgz     [X] xshare65.tgz
Set name(s)? (or 'abort' or 'done') [done]
Cannot determine prefetch area. Continue without verification? [no] yes
Installing bsd          100% |**************************|  9198 KB    00:02
Installing bsd.mp       100% |**************************|  9265 KB    00:02
Installing bsd.rd       100% |**************************| 12845 KB    00:03
Installing base65.tgz   100% |**************************|   148 MB    02:35
Extracting etc.tgz      100% |**************************|   260 KB    00:00
Installing comp65.tgz   100% |**************************| 51128 KB    01:09
Installing man65.tgz    100% |**************************|  7385 KB    00:18
Installing game65.tgz   100% |**************************|  2732 KB    00:02
Installing xbase65.tgz  100% |**************************| 18681 KB    00:24
Extracting xetc.tgz     100% |**************************|  6939       00:00
Installing xshare65.tgz 100% |**************************|  4448 KB    00:21
Installing xfont65.tgz  100% |**************************| 39345 KB    00:33
Installing xserv65.tgz  100% |**************************| 10064 KB    00:06
Location of sets? (disk http nfs or 'done') [done]

What timezone are you in? ('?' for list) [Canada/Mountain] ?
Africa/      Chile/       GB-Eire      Israel       Navajo       US/
America/     Cuba         GMT          Jamaica      PRC          UTC
Antarctica/  EET          GMT+0        Japan        PST8PDT      Universal
Arctic/      EST          GMT-0        Kwajalein    Pacific/     W-SU
Asia/        EST5EDT      GMT0         Libya        Poland       WET
Atlantic/    Egypt        Greenwich    MET          Portugal     Zulu
Australia/   Eire         HST          MST          ROC          posix/
Brazil/      Etc/         Hongkong     MST7MDT      ROK          posixrules
CET          Europe/      Iceland      Mexico/      Singapore    right/
CST6CDT      Factory      Indian/      NZ           Turkey
Canada/      GB           Iran         NZ-CHAT      UCT
What timezone are you in? ('?' for list) [Canada/Mountain] Asia
What sub-timezone of 'Asia' are you in? ('?' for list) ?
Aden            Chongqing       Jerusalem       Novokuznetsk    Tashkent
Almaty          Chungking       Kabul           Novosibirsk     Tbilisi
Amman           Colombo         Kamchatka       Omsk            Tehran
Anadyr          Dacca           Karachi         Oral            Tel_Aviv
Aqtau           Damascus        Kashgar         Phnom_Penh      Thimbu
Aqtobe          Dhaka           Kathmandu       Pontianak       Thimphu
Ashgabat        Dili            Katmandu        Pyongyang       Tokyo
Ashkhabad       Dubai           Khandyga        Qatar           Tomsk
Atyrau          Dushanbe        Kolkata         Qostanay        Ujung_Pandang
Baghdad         Famagusta       Krasnoyarsk     Qyzylorda       Ulaanbaatar
Bahrain         Gaza            Kuala_Lumpur    Rangoon         Ulan_Bator
Baku            Harbin          Kuching         Riyadh          Urumqi
Bangkok         Hebron          Kuwait          Saigon          Ust-Nera
Barnaul         Ho_Chi_Minh     Macao           Sakhalin        Vientiane
Beirut          Hong_Kong       Macau           Samarkand       Vladivostok
Bishkek         Hovd            Magadan         Seoul           Yakutsk
Brunei          Irkutsk         Makassar        Shanghai        Yangon
Calcutta        Istanbul        Manila          Singapore       Yekaterinburg
Chita           Jakarta         Muscat          Srednekolymsk   Yerevan
Choibalsan      Jayapura        Nicosia         Taipei
What sub-timezone of 'Asia' are you in? ('?' for list) Tokyo
Saving configuration files... done.
Making all device nodes... done.
Multiprocessor machine; using bsd.mp instead of bsd.
Relinking to create unique kernel... done.

CONGRATULATIONS! Your OpenBSD install has been successfully completed!

When you login to your new system the first time, please read your mail
using the 'mail' command.

Exit to (S)hell, (H)alt or (R)eboot? [reboot]
syncing disks... done
ehci0: halt timeout
ehci0: reset timeout
rebooting...

2019/10/01(火)PINE64+ に OpenBSD6.5 をインストールした

PINE に OpenBSD6.5 をインストールした。
内容は以前に行った内容と同じである。

シングルボードコンピュータへのOpenBSDのインストール
https://hesy.dyndns.dk/019


インストールに使ったのは次のボードである。
PINE A64 (+)
https://www.pine64.org/devices/single-board-computers/pine-a64/
PINE A64 Wiki
https://wiki.pine64.org/index.php/PINE_A64_Main_Page


まず公式サイトからインストール用ファイルをダウンロードする。
https://www.openbsd.org/faq/faq4.html
minirootXX.fs [arm64] から miniroot65.fs をダウンロードした。


LinuxなどのUnix系OSを使い、マイクロSDカードにデータを書き込む。
次のコマンドは Ubuntu で実行したもので 書き込む先のマイクロSDは /dev/sdb となっている。
$ sudo dd if=miniroot65.fs of=/dev/sdb bs=1M status=progress


書き込みが終われば、PINE に挿し込む、シリアル接続し、LANケーブルを繋いだ後、電源ケーブルを差す。
シリアルの接続は以前の記事を見てもらうとして、今回はシリアルのコンソールをTeraTermProにした。

コンソール画面にはインストールの画面が表示されるので指示に従い入力を行えばインストールが出来る。

インストールが完了した直後のOSの容量は次のようになっていた。
尚、インストールはXを含めすべてを導入済みである。
Filesystem     Size    Used   Avail Capacity  Mounted on
/dev/sd0a      1.7G    938M    751M    56%    /
かなり軽量ではあるが、以前と比べるとかなりデータ量が増えたようだ。
OK キャンセル 確認 その他